Lesson 2 – Completing The Build

Tutorial 2a – 

  1. Your next tutorial of this series is going to be, “Building Your GoPiGo – Stage 2”
  2. As part of this tutorial you will complete the build of the GoPiGo robot.
  3. Click here to access the tutorial – <Link>. Let’s start building!!!!
  4. Clicking on the link opens up a new window.

Tutorial 2b – 

  1. Ther next tutorial in this series is going to be, “Assembling the line follower – Stage 2a”
  2. If you have purchased the line follower kit for use with the GoPiGo 3 then this section is for you
  3. As part of this tutorial you will build and connect the line follower assembly to the GoPiGo 3 robot we’ve just built.
  4. Click here to access the tutorial – <Link>. Let’s start building!!!
  5. Clicking on the link opens up a new window.

Tutorial 2c – 

  1. The next tutorial in this series is going to be, “Assembling the Raspberry Pi Camera and mounting it with the servo  kit – Stage 2c”
  2. If you have purchased the servo kit for use with the Raspberry Pi camera or just a Raspberry Pi Camera then this section is for you
  3. As part of this tutorial you will setup the Raspberry Pi Camera, wire it up to the Raspberry Pi and connect the entire setup to the GoPiGo 3 robot we’ve just built.
  4. Click here to access the tutorial – <Link>. Let’s start building!!!!
  5. Clicking on the link opens up a new window.

Prerequisites –

This development track is based on the GoPiGo 3.  If you do not have one and are looking to pick up a GoPiGo 3 robotics kit yet please head over to OzToyLib and purchase one now.

The recommended Bill Of Material for this courses includes –

  1. GoPiGo Robot –
    1. GoPiGo Robot Advanced Starter Kit   Or
    2. GoPiGo Robot Beginners Starter Kit
  2. GoPiGo Line Sensor
  3. GoPiGo Servo Package

For detailed list of prerequisites please refer to the first tutorial.


Reference – 

  1. Learn more about the GoPoGo here – <Link>

Questions